This morning we were not able to use Auto Value. (bumper to bumper)
After a short, very pleasant, time with the heroes at TS it was found there is a patch.
If you have an issue give them a quick call. I'd post the fix but not sure that Tim wants that. If so I will post.
AutoValue issue,FYI
-
Rich
- 4K Ultra Amazing Contributor
- Posts: 4049
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
AutoValue issue,FYI
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
-
timbre4
- System Guru / Moderator
- Posts: 4532
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: AutoValue issue,FYI
I'm thinking this is perhaps just a newer catalog install file from m1files.com SE Catalog Installers page?
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
-
Rich
- 4K Ultra Amazing Contributor
- Posts: 4049
- Joined: Tue Sep 06, 2005 10:16 am
- Location: Somewhere in Michigan
- Contact:
Re: AutoValue issue,FYI
It may have been. That is where tech support went to get file. My issue was when I clicked the button to open AutoValue it did nothing at all.
Rich Hays
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
Work 9-11 or 616-696-0020
Being able to get CAPE off a Skew T chart is important in this hobby.
-
timbre4
- System Guru / Moderator
- Posts: 4532
- Joined: Tue May 25, 2004 5:47 pm
- Location: TN - Volunteer State
Re: AutoValue issue,FYI
silky7 confirmed this was the case. The vendors can make any kind of small change and then a newer catalog installer smoothes things over once again.
Tim McDonnell -
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer
Sr. Product Market Mgr / Forum Moderator / Mitchell 1 Media Developer