Estimate

brianp87 · Post by **brianp87** » Tue May 05, 2015 12:57 pm

I do not see and estimate w/o part #'s and w/o hours. Only w/o hours

ricmorin · Post by **ricmorin** » Tue May 05, 2015 1:15 pm

What version are you on? This is the list from 6.5.57....

: estnohoursnopartno.png (49.1 KiB) Viewed 10301 times

brianp87 · Post by **brianp87** » Tue May 05, 2015 2:14 pm

Hmm I don't have it?

: Edited for width with Snag It; EST.png (273.72 KiB) Viewed 10251 times

brianp87 · Post by **brianp87** » Tue May 05, 2015 2:17 pm

And on another note how do you cut the screen nicely to look like that?

ricmorin · Post by **ricmorin** » Tue May 05, 2015 2:56 pm

I see from your pic that you are on 6.5.54. I don't think this Estimate becomes available until 6.5.57. You'll get it on the next update.

I use a clipping program that allows me to select the exact window I want.

brianp87 · Post by **brianp87** » Tue May 05, 2015 3:24 pm

Hmmm. Ok thank you

Sauvageaus · Post by **Sauvageaus** » Tue May 05, 2015 4:05 pm

brianp87 wrote:And on another note how do you cut the screen nicely to look like that?

search for a program called PrintKey 2000, should be a free one and when you hit print screen it automatically pops up the screen that was printed and you then can select "rectangle" and then drag what you want shown and then save that.

McKennaAuto · Post by **McKennaAuto** » Wed May 06, 2015 5:48 am

ricmorin wrote:I see from your pic that you are on 6.5.54. I don't think this Estimate becomes available until 6.5.57. You'll get it on the next update.

Any idea when that update may come out? I've been waiting so long for this since it's been lost....

ricmorin · Post by **ricmorin** » Wed May 06, 2015 5:53 am

Updates are staggered to minimize the impact on support. I've actually skipped an update in the past and gotten an even newer one.

brianp87 · Post by **brianp87** » Wed May 06, 2015 6:06 am

Sauvageaus wrote:
brianp87 wrote:And on another note how do you cut the screen nicely to look like that?
search for a program called PrintKey 2000, should be a free one and when you hit print screen it automatically pops up the screen that was printed and you then can select "rectangle" and then drag what you want shown and then save that.

Thank you

McKennaAuto · Post by **McKennaAuto** » Wed May 06, 2015 6:08 am

I understand but this is important. Would be nice if it was simply added to m1files or m1faqs to speed things along. There used to be one on there that worked with older versions, I loaded it on just to get by. However its lost again.
But, thank you for your help. =)

Walt

ricmorin · Post by **ricmorin** » Wed May 06, 2015 6:08 am

I use a program called SnagIt. It is not free, but well worth it.

timbre4 · Post by **timbre4** » Wed May 06, 2015 6:11 am

As ricmorin points out there can be no exact "publish" date due to the sheer number of users. The best we can do at this time is to tell users it is now available and then put groups of users into getting the update notice. We have to start slow and make sure there are no show-stoppers hiding in the bushes as this would be bad for users and tech support alike. Depending on what is discovered, a newer version may be created to propagate instead.

We're only a year into this and getting better at it. We work to keep shop inconvenience to an absolute minimum; a little wait is likely better than enduring a crippling defect that prevents doing business.

ricmorin · Post by **ricmorin** » Wed May 06, 2015 6:14 am

McKennaAuto wrote:I understand but this is important. Would be nice if it was simply added to m1files or m1faqs to speed things along. There used to be one on there that worked with older versions, I loaded it on just to get by. However its lost again.
But, thank you for your help. =)

Walt

Because this is a new report that does not appear in 6.5.54, there is more programming needed to make it appear in the list. That makes it less practical to use the upload site for this. If it was a simple redo of an existing file, they would likely use the upload site.

It's important to note that any custom uploaded reports are lost during an update if they are not included in the update.

Silky7 · Post by **Silky7** » Wed May 06, 2015 6:22 am

Just two other suggestions for screenshots: Brian, it looks like you're running Windows 7. It has a native tool to do this called the Snipping Tool. It's under Programs>Accessories. Also, if you want to take a screenshot of one window, use the key combination of alt+PrintScreen and it will only capture the window in focus. Hope this helps.

brianp87 · Post by **brianp87** » Wed May 06, 2015 6:36 am

Silky7 wrote:Just two other suggestions for screenshots: Brian, it looks like you're running Windows 7. It has a native tool to do this called the Snipping Tool. It's under Programs>Accessories. Also, if you want to take a screenshot of one window, use the key combination of alt+PrintScreen and it will only capture the window in focus. Hope this helps.

That snipping tool worked perfectly. Now if I can remember to use it and not make the pictures so large when I put them on here.

McKennaAuto · Post by **McKennaAuto** » Thu Aug 20, 2015 6:15 am

Curious if there has been any forward momentum in this estimate without part numbers report yet?

Thank you,

Walt

ricmorin · Post by **ricmorin** » Thu Aug 20, 2015 7:06 am

McKennaAuto wrote:Curious if there has been any forward momentum in this estimate without part numbers report yet?

Thank you,

Walt

There's no forward momentum on this report. It's already available for users with 6.5.57 and above. If you are still on an earlier version, check with support to see where you are in the queue or if your Updater is not working properly. The other option is to upgrade to 6.6.9 manually which you can do from the following link. If you're a multi-user, you must update the host first.

http://www.m1faqs.com/fix/SE/index.htm

McKennaAuto · Post by **McKennaAuto** » Thu Aug 20, 2015 8:30 am

Thank you!
Going to update to 6.6.9 manually, still stuck on 6.5.54

I greatly appreciate the link.

Walt

sbcauto · Post by **sbcauto** » Thu Aug 20, 2015 8:55 am

I'm on SE 6.5.57 And Under Estimate, Second From Top, I Have Report w/o part Number & w/o Labour.
Hope that helps.

Estimate

Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate

Re: Estimate