I cannot get any brake pedal.
Master has been changed twice; I am getting good flow to all the calipers & proportioning valve.
1991 Toyota Previa - No Brake Pedal
- wbuxton
- 1000 Club: Interstellar
- Posts: 1293
- Joined: Fri Jan 05, 2007 8:08 am
- Location: 30 miles west of Fort Worth
- Contact:
Re: 1991 Toyota Previa - No Brake Pedal
If it has drum brakes be sure they are properly adjusted.
Uncle PETA said I could come back.
William
Weatherford, TX
817-599-7680
866-744-3887
http://www.phoenixtrans.com
William
Weatherford, TX
817-599-7680
866-744-3887
http://www.phoenixtrans.com
-
- 100 Club: Active Contributor
- Posts: 105
- Joined: Tue May 15, 2007 4:15 am
- Location: Simpsonville S.C.
Re: 1991 Toyota Previa - No Brake Pedal
Im sorry,it has disk on the rear.
- ricmorin
- 5K Holy Smokes Contributor
- Posts: 5997
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: 1991 Toyota Previa - No Brake Pedal
I'd start pinching off the caliper hoses to try to narrow down where it is coming from.
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
- steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: 1991 Toyota Previa - No Brake Pedal
history? if it came in with all fluid out of master you may have to pressure bleed and activate the abs module to get all the air out. i've also had situations where a bearing is so blown it will collapse a caliper piston when the rotor comes to rest against it.......................................
never argue with a fool, they'll drag you down to their level and beat you with experience