Hi. Is there any Registry hacks, etc., that can eliminate the annoying warning: "Are you sure you want to remove the selected item(s)" when doing a ctrl-x cut of a note or labor operation from the order, estimate, and revision screens?
Thank you.
Arnold
Removing "Are you sure you want to..." Warning
-
steven kiser
- 5K Holy Smokes Contributor
- Posts: 6184
- Joined: Fri Jul 06, 2007 4:58 am
- Location: eastern ma.
Re: Removing "Are you sure you want to..." Warning
Is it really that much of an annoyance? Speaking for myself I've been saved by that message on more than one occasion. Not being a computer wizard but would getting what you want cause any other changes in the programming?
never argue with a fool, they'll drag you down to their level and beat you with experience
-
ricmorin
- 5K Holy Smokes Contributor
- Posts: 5997
- Joined: Mon Jul 25, 2005 10:11 am
- Location: New Hampshire
- Contact:
Re: Removing "Are you sure you want to..." Warning
Those warnings annoy me as well, but that one time when it prevents you from doing something unintended...priceless.
Ric Morin - Volunteer Forum Moderator, Shop Owner, ASE Master L1
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
Motorcar Alternatives, LLC
603-622-6434 x203
www.motorcaralternatives.com
I find my life is a lot easier when I use Special Orders
-
Johnny5
- 500 Club: Champion Contributor
- Posts: 654
- Joined: Wed May 26, 2004 2:03 pm
- Location: John Dwulet
Re: Removing "Are you sure you want to..." Warning
Do what I do if you really want to delete the line fast: As fast as you can (and accurately) hit the DEL Key and then the Enter Key. One click to 'grab' the line, a fast keystroke and the line is gone.
John Dwulet AKA: Johnny5
Retired - Mitchell1
Retired - Mitchell1