XCharge Customer Signature Receipt Print Setting?

Offerman22 · Post by **Offerman22** » Wed Aug 20, 2014 11:00 am

We have 2 computers at our service desk running X-Charge, each has their own separate printer. The host does not print a customer signature receipt but the 2nd computer automatically prints one as soon as card is approved. Where do I find the settings for printing customer signature receipts?

timbre4 · Post by **timbre4** » Wed Aug 20, 2014 1:54 pm

The receipt printing is set up on the individual XCharge clients. File > Setup and then the Receipts tab.

Offerman22 · Post by **Offerman22** » Thu Aug 21, 2014 3:56 am

Thanks a bunch, Tim! Good to go.

Offerman22 · Post by **Offerman22** » Mon Oct 06, 2014 4:31 am

We were able to successfully print signature/credit card receipts upon changing x-charge printer settings per Tim's instruction. Recently, we had to replace our printer and upon replacing, the signature receipt now "prints" a blank sheet of paper. Invoices, R/O's, Tech sheets, etc. all print just fine but the X-charge CC receipt feeds out completely blank. I've looked at my settings and can't seem to figure this out. Please help.

timbre4 · Post by **timbre4** » Mon Oct 06, 2014 2:03 pm

I've alerted product management and they said someone would be reaching out to help you.

sparksccc · Post by **sparksccc** » Tue Oct 07, 2014 3:50 am

My x-charge is still printing one copy did I miss the fix for this.

timbre4 · Post by **timbre4** » Tue Oct 07, 2014 7:13 am

sparksccc wrote:My x-charge is still printing one copy did I miss the fix for this.

I believe the answer is in post #2

Offerman22 · Post by **Offerman22** » Mon Oct 13, 2014 8:06 am

timbre4 wrote:I've alerted product management and they said someone would be reaching out to help you.

Nobody has reached out, Tim. Please advise.

timbre4 · Post by **timbre4** » Mon Oct 13, 2014 9:52 am

Checking on this, we have all been in workshop mode the past few days.

timbre4 · Post by **timbre4** » Mon Oct 13, 2014 2:49 pm

Update from product management:

"The date that prints on the Report Pro Custom Multi Point Inspection is the Inspection Date of the vehicle on the Vehicle Tab in Mitchell Manager.
Update the Inspection Date on the Vehicle Tab in Mitchell Manager and Reload the Custom Multi Point Inspection."

Offerman22 · Post by **Offerman22** » Tue Oct 14, 2014 10:55 am

I called X-Charge support and they logged in to remedy. It turns out that "raw" printing selection rather than "windows" printing selection under printing tab, under setup was checked. Once "windows" printing box was checked and "raw" was unchecked, the signature copy began to print as it should.

XCharge Customer Signature Receipt Print Setting?

XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?

Re: XCharge Customer Signature Receipt Print Setting?