What Needs To be Fixed In ProDemand

[timbre4]

Okay, so to get to those items, you'd have to go through this:

diffs2.png (41.67 KiB) Viewed 45219 times

[brianp87]

2004 Dodge 3500

Here is another it does not say if this is front or rear ring and pinion.

[timbre4]

Same; sub-category [boxed in red] confirms Front or Rear for the items that follow once you select:

diffs3.png (44.2 KiB) Viewed 45218 times

[brianp87]

Mine does not do that. It goes like this on my end. For the 2011 F350.

[brianp87]

Here is the 2004 Dodge

[timbre4]

Okay, had to go back to another PC with SE 7.2.9 to see what you're seeing. So when you get SE 7.3.x in a few weeks it has the views I've shown above.

[sbcauto]

I Have Found Since My Last Post That On demand Is A Lot Better. Still Would Like to Print A Larger Wiring Diagram. Thanks

[himels]

When attempting to print a wiring diagram, I select the full page and it shows the print preview image on the screen as a Black & White image with a check mark that has to be removed each time if I would like to print in color. I would like to set the default to Color and avoid having to un-check each diagram for color printing.

[timbre4]

I would like to set the default to Color and avoid having to un-check each diagram for color printing.

Thanks for posting; inquiry made.

[timbre4]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

[sbebenelli]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

Who would want to print a color wiring diagram in black & white lol

[timbre4]

Here is the response regarding printing question:

"We created the current experience because people complained about the cost of color ink cartridges."

Who would want to print a color wiring diagram in black & white lol

I know, but you'd be amazed how many calls we got.

[ricmorin]

Maybe make it a sticky setting so that users can choose one and never have to change it? I too find it annoying that I have to uncheck that box EVERY time.

[timbre4]

Maybe make it a sticky setting so that users can choose one and never have to change it? I too find it annoying that I have to uncheck that box EVERY time.

If it was a desktop app, it would be pretty simple. I believe the printing attribute in a browser is problematic or we'd have that option. I did hear that it *might* be possible to discern what type of document and print appropriately. (thinking B/W for repair info + color for diagrams as example)

[ricmorin]

I had a feeling. If it's a one page diagram I pull it up on the 32 inch screen.

diagnostic cart

20200219_140002little.jpg (44.85 KiB) Viewed 43633 times

Multi page diagrams are a different story.

[sbebenelli]

I'm the same way. I have a 32" at my tool box. I would rather look at a wiring diagram on that than a small piece of paper.